{"id":2776,"date":"2015-03-05T20:13:04","date_gmt":"2015-03-06T01:13:04","guid":{"rendered":"http:\/\/certek.com\/kb4\/?p=2776"},"modified":"2023-06-20T11:38:27","modified_gmt":"2023-06-20T15:38:27","slug":"epson-tm-t20-printer-setup","status":"publish","type":"ht_kb","link":"https:\/\/certek.com\/kb4\/knowledge-base\/epson-tm-t20-printer-setup\/","title":{"rendered":"Epson TM-T20 Printer Setup – Mac"},"content":{"rendered":"

This article explains how to setup the Epson TM-T20\u00a0series receipt printer for Artisan 4.0 on\u00a0a\u00a0Mac with or without a cash drawer<\/p>\n

Note:<\/strong>\u00a0There are some special configurations that need to be followed for current versions of Artisan 4.0, this article and the procedure itself will most likely change as Artisan POS finishes beta testing.<\/p>\n

\n

Step 1: Download & Install Driver<\/h3>\n

First, we will install the printer using the manufacturer’s driver as any other regular printer.<\/p>\n

1.<\/strong>\u00a0Download the driver from\u00a0https:\/\/download.epson-biz.com\/modules\/pos\/index.php?page=single_soft&cid=4225&scat=33&pcat=3<\/span><\/a><\/span><\/p>\n

You could also download it from\u00a0S:\\Install\\Certek Computer Setup\\Printers\\Receipt Printers\\Epson\\Mac\\TM-T20II_MacDrv_12a<\/p>\n

2<\/strong>. Locate the driver in the designated downloads folder, it should be named “TM-T20II_MacDrv_12b”<\/p>\n

3<\/strong>. In the folder, locate the actual driver package to be installed,TM-T20II_MacDrv_12b =>\u00a0TM-T20II_MacDrv_12a.dmg<\/p>\n

 <\/p>\n

\"Epson-Driver-Location\"<\/a><\/p>\n

 <\/p>\n

4<\/strong>. Connect the Epson Receipt Printer at this time<\/p>\n

5<\/strong>. Double-click on the package to install it.<\/p>\n

 <\/p>\n

\"OpenEpsonPackage\"<\/a><\/p>\n

6<\/strong>. If you get a message like the one on the image below, it is because the printer is not being recognized at the moment, but it will be later. \u00a0Just check the box and then click\u00a0“Continue”<\/strong><\/p>\n

\"EpsonPrompt\"<\/a><\/p>\n

 <\/p>\n

7.<\/strong>\u00a0Follow the prompts. It should install and display a “successful” message.<\/p>\n

\"EpsonSuccessfulInstall\"<\/a><\/p>\n

\n

 <\/p>\n

Step 2: Add\u00a0Printer to\u00a0Mac OS<\/h3>\n

Now make sure the printer has been installed by checking the printers panel. It may not be added to the Mac system automatically so we need to do it manually.<\/p>\n

1.<\/strong>\u00a0Open System Preferences<\/p>\n

2<\/strong>. Select Printers & Scanners. You may have the Epson already installed, if so move on to Step 3: Set receipt printer in Artisan<\/strong>. If not then follow this section.<\/p>\n

3.<\/strong> You will see window similar to the one below. Click on the (+) icon to add a printer from a list of available printers.<\/p>\n

\"AddEpsonMac\"<\/a><\/p>\n

 <\/p>\n

\"EpsonPrinterAdded\"<\/a><\/p>\n

 <\/p>\n

3<\/strong>.\u00a0Now select the Epson TM-T20 printer from the list of available printers and click on Choose Driver to a select the appropriate one.<\/p>\n

\"SelectEpsonPrinter\"<\/p>\n

 <\/p>\n

 <\/p>\n

\"SelectEpsonSoftware\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

4. <\/strong>From\u00a0the list of drivers, select\u00a0the Epson TM-T20 driver and click OK.<\/p>\n

 <\/p>\n

\"SelectEpsonDriver\"<\/strong><\/p>\n

 <\/p>\n

 <\/p>\n

5. \u00a0<\/strong>Now the printer should appear as available (if turned ON) on the Printers & Scanners window. This steps finished the installation of the printer. It is time to set it up in Artisan POS.<\/p>\n

 <\/p>\n

\"EpsonPrinterAdded\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

\n

Step 3: Set Receipt Printer in Artisan<\/h3>\n

Now, it is time to set it up in Artisan so that it\u00a0prints receipts BUT does not open the cash drawer (YET).\u00a0<\/strong><\/p>\n

1<\/strong>. In Artisan go to Printer\u00a0Configuration (Main Menu => Tools => Program Options => Device Configuration => Printers)<\/p>\n

2.<\/strong>\u00a0Configure the\u00a0Epson\u00a0printer following this image.<\/p>\n

\"EpsonArtisanSettings1\"<\/a><\/p>\n

3<\/strong>. The most important setting here is “Printer Model”, if you will use\u00a0a cash drawer attached to this printer, make sure “Other Thermal” is selected as the option.<\/p>\n

NOTE<\/strong><\/span>: If you are not using a cash drawer, you could select “Epson Compatible Thermal Receipt Printer” for Printer Model and this would be your last step; otherwise, MAKE SURE “Other Thermal” is selected or it will cause issues in the next steps.<\/p>\n

Again,\u00a0If you are not using a cash drawer with this printer. This would be the last step and you do not need to keep going. Just make sure everything works as supposed to.<\/p>\n

\n

 <\/p>\n

Step 4:\u00a0Disable Default Cash Drawer Feature<\/h3>\n

If you have followed the steps correctly with the driver, the CUPS interface should allow disabling the cash drawer for the Epson printer.<\/p>\n

1.<\/strong>\u00a0First, try to access the CUPS interface by opening the web browser and going to\u00a0http:\/\/localhost:631\/printers\/<\/strong><\/a><\/p>\n

If CUPS interface is not enable, you should see instructions on how to enable it by going to the Terminal and typing “cupsctl WebInterface=yes”<\/p>\n

Once it is enabled, then try again going to the address given above.<\/p>\n

2.<\/strong>\u00a0From the list of printers, select the Epson Printer to go into its options (Click on it to select it)<\/p>\n

 <\/p>\n

\"DisableCDOption\"<\/a><\/p>\n

 <\/p>\n

3<\/strong>. Go into the “Set Default Options”<\/strong>\u00a0by going to the drop-down menu<\/p>\n

\"IntoDOptions\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

4.<\/strong>\u00a0Select “Cash Drawer Control” and set it up according to the image below. Make sure Cash Drawer is set to “Do Not Open Drawers”<\/p>\n

\"CDNoOpen\"<\/a><\/p>\n

 <\/p>\n

\n

 <\/p>\n

Step 5:\u00a0Add Fictitious<\/span>\u00a0Printer for Cash Drawer<\/h3>\n

Since the Epson interface does not work correctly yet, and we need to control the printer in different manners, the only option we have available is to create a virtual\u00a0printer through CUPS that allows us to talk to the Epson printer and work independently to open the cash drawer. To do this, follow the steps below.<\/p>\n

1.<\/strong>\u00a0Go to\u00a0http:\/\/localhost:631\/admin<\/a>\u00a0<\/strong>and add a new printer.<\/p>\n

\"Create<\/a><\/p>\n

2.<\/strong>\u00a0Pick the Epson printer from the list of local printers, this will let us send commands to this printer even though it is already installed and being used by the OS. Notice there are two instances for the Epson printer\u00a0on the list. Select the one that starts with the actual brand, “Epson” in this case, although this does not really matter.<\/p>\n

\"AddEpsonCUPS\"<\/a><\/p>\n

3.<\/strong>\u00a0Name this printer to\u00a0differentiate it from the actual Epson printer already in the system. (Remember this will only be used by the cash drawer) so we recommend to add -CashDrawer to the name already in the box. (Do not use spaces)<\/p>\n

Name:\u00a0<\/strong>EPSON TM-T20II-CashDrawer<\/p>\n

Description:\u00a0<\/strong>EPSON_TM-T20II-CashDrawer<\/p>\n

Location:<\/strong> RegX (X being register number) not required but recommended.<\/p>\n

Sharing<\/strong>: not necessary<\/p>\n

\"AddEpsonCUPS-Name\"<\/a><\/p>\n

4.<\/strong>\u00a0For the make, click on\u00a0“Select Another Make\/Manufacturer”<\/strong>\u00a0and then search the list for\u00a0“Raw”<\/strong><\/p>\n

\"SelectManucfCUPS\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

\"EpsonSelectRaw\"<\/a>
\n<\/a><\/p>\n

5.<\/strong>\u00a0Click “Continue” then select “Raw Queue (en)<\/strong>“. Lastly, click on “Add Printer<\/strong>” to finish adding a raw instance of the Epson printer.<\/p>\n

\"EpsonRawAdd\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

6.<\/strong> Once “Add Printer” is clicked upon, “Set Printer Options” screen will open, ignore this. Just click on “Set Default Options”.<\/p>\n

\"EpsonSetFinalDefaults\"<\/a><\/p>\n

 <\/p>\n

A confirmation message will be shown if successful. Then a blank page will be display, go back to CUPS Administration.<\/p>\n

 <\/p>\n

\"2015-03-05_14h08_37\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

\n

7.<\/strong>\u00a0Now that we had added the raw printer, we need to add a class so that it shows up on the operating system interface and Artisan POS is able to use it.<\/p>\n